<?xml version="1.0" encoding="UTF-8"?>
<!--
  Licensed to the Apache Software Foundation (ASF) under one or more
  contributor license agreements.  See the NOTICE file distributed with
  this work for additional information regarding copyright ownership.
  The ASF licenses this file to You under the Apache License, Version 2.0
  (the "License"); you may not use this file except in compliance with
  the License.  You may obtain a copy of the License at

      http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
-->
<!DOCTYPE document [
  <!ENTITY project SYSTEM "project.xml">
]>
<document url="ajp.html">

  &project;

  <properties>
    <title>The AJP Connector</title>
  </properties>

<body>

<section name="Table of Contents">
<toc/>
</section>

<section name="Introduction">

  <p>The <strong>AJP Connector</strong> element represents a
  <strong>Connector</strong> component that communicates with a web
  connector via the <code>AJP</code> protocol.  This is used for cases
  where you wish to invisibly integrate Tomcat into an existing (or new)
  Apache installation, and you want Apache to handle the static content
  contained in the web application, and/or utilize Apache's SSL
  processing.</p>

  <p>Use of the AJP protocol requires additional security considerations because
  it allows greater direct manipulation of Tomcat's internal data structures
  than the HTTP connectors. Particular attention should be paid to the values
  used for the <code>address</code>, <code>secret</code>,
  <code>secretRequired</code> and <code>allowedRequestAttributesPattern</code>
  attributes.</p>

  <p>This connector supports load balancing when used in conjunction with
  the <code>jvmRoute</code> attribute of the
  <a href="engine.html">Engine</a>.</p>

  <p>The native connectors supported with this Tomcat release are:</p>
    <ul>
      <li>JK 1.2.x with any of the supported servers. See
      <a href="https://tomcat.apache.org/connectors-doc/">the JK docs</a>
      for details.</li>
      <li>mod_proxy on Apache httpd 2.x (included by default in Apache HTTP
      Server 2.2), with AJP enabled: see
      <a href="https://httpd.apache.org/docs/2.2/mod/mod_proxy_ajp.html">the
      httpd docs</a> for details.</li>
    </ul>

  <p><b>Other native connectors supporting AJP may work, but are no longer
  supported.</b></p>

</section>


<section name="Attributes">

  <subsection name="Common Attributes">

  <p>All implementations of <strong>Connector</strong>
  support the following attributes:</p>

  <attributes>

    <attribute name="allowBackslash" required="false">
      <p>If this is <code>true</code> the '\' character will be permitted as a
      path delimiter.</p>
      <p>If not specified, the default value of <code>false</code> will be used.</p>
    </attribute>

    <attribute name="allowTrace" required="false">
      <p>A boolean value which can be used to enable or disable the TRACE
      HTTP method. If not specified, this attribute is set to false. As per RFC
      7231 section 4.3.8, cookie and authorization headers will be excluded from
      the response to the TRACE request. If you wish to include these, you can
      implement the <code>doTrace()</code> method for the target Servlet and
      gain full control over the response.</p>
    </attribute>

    <attribute name="asyncTimeout" required="false">
      <p>The default timeout for asynchronous requests in milliseconds. If not
      specified, this attribute is set to the Servlet specification default of
      30000 (30 seconds).</p>
    </attribute>

    <attribute name="discardFacades" required="false">
      <p>A boolean value which can be used to enable or disable the recycling
      of the facade objects that isolate the container internal request
      processing objects. If set to <code>true</code> the facades will be
      set for garbage collection after every request, otherwise they will be
      reused. If not specified, this attribute is set to <code>true</code>.</p>
    </attribute>

    <attribute name="enableLookups" required="false">
      <p>Set to <code>true</code> if you want calls to
      <code>request.getRemoteHost()</code> to perform DNS lookups in
      order to return the actual host name of the remote client.  Set
      to <code>false</code> to skip the DNS lookup and return the IP
      address in String form instead (thereby improving performance).
      By default, DNS lookups are disabled.</p>
    </attribute>

    <attribute name="encodedReverseSolidusHandling" required="false">
      <p>When set to <code>reject</code> request paths containing a
      <code>%5c</code> sequence will be rejected with a 400 response. When set
      to <code>decode</code> request paths containing a <code>%5c</code>
      sequence will have that sequence decoded to <code>\</code> at the same
      time other <code>%nn</code> sequences are decoded. When set to
      <code>passthrough</code> request paths containing a <code>%5c</code>
      sequence will be processed with the <code>%5c</code> sequence unchanged.
      </p>
      <p>When set to <code>decoded</code>, the <strong>allowBackslash</strong>
      attribute will be applied after decoding.
      </p>
      <p>If <code>passthrough</code> is used then it is the application's
      responsibility to perform any further <code>%nn</code> decoding required.
      Any <code>%25</code> sequences (encoded <code>%</code>) in the request
      path with also be processed with the <code>%25</code> sequence unchanged
      to avoid potential corruption and/or decoding failure when the path is
      subsequently <code>%nn</code> decoded by the application.</p>
      <p>If not specified, the default value is <code>decode</code>.</p>
    </attribute>

    <attribute name="encodedSolidusHandling" required="false">
      <p>When set to <code>reject</code> request paths containing a
      <code>%2f</code> sequence will be rejected with a 400 response. When set
      to <code>decode</code> request paths containing a <code>%2f</code>
      sequence will have that sequence decoded to <code>/</code> at the same
      time other <code>%nn</code> sequences are decoded. When set to
      <code>passthrough</code> request paths containing a <code>%2f</code>
      sequence will be processed with the <code>%2f</code> sequence unchanged.
      </p>
      <p>If <code>passthrough</code> is used then it is the application's
      responsibility to perform any further <code>%nn</code> decoding required.
      Any <code>%25</code> sequences (encoded <code>%</code>) in the request
      path with also be processed with the <code>%25</code> sequence unchanged
      to avoid potential corruption and/or decoding failure when the path is
      subsequently <code>%nn</code> decoded by the application.</p>
      <p>If not specified the default value is <code>reject</code>.</p>
    </attribute>

    <attribute name="enforceEncodingInGetWriter" required="false">
      <p>If this is <code>true</code> then
      a call to <code>Response.getWriter()</code> if no character encoding
      has been specified will result in subsequent calls to
      <code>Response.getCharacterEncoding()</code> returning
      <code>ISO-8859-1</code> and the <code>Content-Type</code> response header
      will include a <code>charset=ISO-8859-1</code> component. (SRV.15.2.22.1)</p>
      <p>If not specified, the default specification compliant value of
      <code>true</code> will be used.</p>
    </attribute>

    <attribute name="maxCookieCount" required="false">
      <p>The maximum number of cookies that are permitted for a request. A value
      of less than zero means no limit. If not specified, a default value of 200
      will be used.</p>
    </attribute>

    <attribute name="maxParameterCount" required="false">
      <p>The maximum total number of request parameters (including uploaded
      files) obtained from the query string and, for POST requests, the request
      body if the content type is
      <code>application/x-www-form-urlencoded</code> or
      <code>multipart/form-data</code>. Requests that exceed this limit will be
      rejected. A value of less than 0 means no limit. If not specified, a
      default of 1000 is used.</p>
    </attribute>

    <attribute name="maxPartCount" required="false">
      <p>The maximum total number of parts permitted in a request where the
      content type is <code>multipart/form-data</code>. This limit is in
      addition to <code>maxParameterCount</code>. Requests that exceed this
      limit will be rejected. A value of less than 0 means no limit. If not
      specified, a default of 50 is used.</p>
      <p>The nature of multipart requests and the associated Servlet API
      requirements for processing them is such that they can place a significant
      demand on memory. Applications utilising multipart requests need to ensure
      sufficient memory is available to avoid a potential denial of service. As
      a guide, the memory required is <code>maxPartHeaderSize</code> x
      <code>maxPartCount</code> x <code>maxConnections</code> x 2 (due to the
      implementation). For the defaults that is <code>512 x 50 x 8192 x 2</code>
      which is 400MB.</p>
    </attribute>

    <attribute name="maxPartHeaderSize" required="false">
      <p>The maximum number of header bytes permitted per part in a request
      where the content type is <code>multipart/form-data</code>. Requests that
      exceed this limit will be rejected. A value of less than 0 means no limit.
      If not specified, a default of 512 is used.</p>
    </attribute>

    <attribute name="maxPostSize" required="false">
      <p>This is the maximum number of request body bytes that will be converted
      into request parameters by Tomcat. This limit only applies in specific
      circumstances and is <strong>not</strong> a general limit on request body
      size for POST requests. The limit only applies when Tomcat is processing
      the request body for parameters as per section 3.1.1
      (<code>application/x-www-form-urlencoded</code>) or section 3.2
      (<code>multipart/form-data</code>) of the Servlet specification. In the
      <code>multipart/form-data</code> case, the limit only applies to the data
      used to generate the parameters that are made available through the
      <code>getParameter()</code> family of methods.</p>
      <p>The limit can be disabled by setting this attribute to a value less
      than zero. Requests that exceed this limit will be rejected. If not
      specified, this attribute is set to 2097152 (2 MiB).</p>
    </attribute>

    <attribute name="maxSavePostSize" required="false">
      <p>The maximum size in bytes of the POST which will be saved/buffered by
      the container during FORM or CLIENT-CERT authentication. For both types
      of authentication, the POST will be saved/buffered before the user is
      authenticated. For CLIENT-CERT authentication, the POST is buffered for
      the duration of the SSL handshake and the buffer emptied when the request
      is processed. For FORM authentication the POST is saved whilst the user
      is re-directed to the login form and is retained until the user
      successfully authenticates or the session associated with the
      authentication request expires. The limit can be disabled by setting this
      attribute to -1. Setting the attribute to zero will disable the saving of
      POST data during authentication. If not specified, this attribute is set
      to 4096 (4 KiB).</p>
    </attribute>

    <attribute name="parseBodyMethods" required="false">
      <p>A comma-separated list of HTTP methods for which request
      bodies using <code>application/x-www-form-urlencoded</code> will be parsed
      for request parameters identically to POST. This is useful in RESTful
      applications that want to support POST-style semantics for PUT requests.
      Note that any setting other than <code>POST</code> causes Tomcat
      to behave in a way that goes against the intent of the servlet
      specification.
      The HTTP method TRACE is specifically forbidden here in accordance
      with the HTTP specification.
      The default is <code>POST</code></p>
    </attribute>

    <attribute name="port" required="true">
      <p>The TCP port number on which this <strong>Connector</strong>
      will create a server socket and await incoming connections.  Your
      operating system will allow only one server application to listen
      to a particular port number on a particular IP address. If the special
      value of 0 (zero) is used, then Tomcat will select a free port at random
      to use for this connector. This is typically only useful in embedded and
      testing applications.</p>
    </attribute>

    <attribute name="protocol" required="false">
      <p>Sets the protocol to handle incoming traffic. To configure an AJP
        connector this must be specified. If no value for protocol is provided,
        an <a href="http.html">HTTP connector</a> rather than an AJP connector
        will be configured.<br/>
        The standard protocol value for an AJP connector is <code>AJP/1.3</code>
        which uses a Java NIO based connector.<br/>
        To use an explicit protocol, the following values may be used:<br/>
        <code>org.apache.coyote.ajp.AjpNioProtocol</code>
        - non blocking Java NIO connector.<br/>
        <code>org.apache.coyote.ajp.AjpNio2Protocol</code>
        - non blocking Java NIO2 connector.<br/>
        Custom implementations may also be used.<br/>
        Take a look at our <a href="#Connector_Comparison">Connector
        Comparison</a> chart.
      </p>
    </attribute>

    <attribute name="proxyName" required="false">
      <p>If this <strong>Connector</strong> is being used in a proxy
      configuration, configure this attribute to specify the server name
      to be returned for calls to <code>request.getServerName()</code>.
      See <a href="#Proxy_Support">Proxy Support</a> for more
      information.</p>
    </attribute>

    <attribute name="proxyPort" required="false">
      <p>If this <strong>Connector</strong> is being used in a proxy
      configuration, configure this attribute to specify the server port
      to be returned for calls to <code>request.getServerPort()</code>.
      See <a href="#Proxy_Support">Proxy Support</a> for more
      information.</p>
    </attribute>

    <attribute name="redirectPort" required="false">
      <p>If this <strong>Connector</strong> is supporting non-SSL
      requests, and a request is received for which a matching
      <code>&lt;security-constraint&gt;</code> requires SSL transport,
      Catalina will automatically redirect the request to the port
      number specified here.</p>
    </attribute>

    <attribute name="rejectSuspiciousURIs" required="false">
      <p>Should this <strong>Connector</strong> reject a requests if the URI
      matches one of the suspicious URIs patterns identified by the Servlet 6.0
      specification? The default value is <code>false</code>.</p>
    </attribute>

    <attribute name="scheme" required="false">
      <p>Set this attribute to the name of the protocol you wish to have
      returned by calls to <code>request.getScheme()</code>.  For
      example, you would set this attribute to "<code>https</code>"
      for an SSL Connector.  The default value is "<code>http</code>".
      </p>
    </attribute>

    <attribute name="secure" required="false">
      <p>Set this attribute to <code>true</code> if you wish to have
      calls to <code>request.isSecure()</code> to return <code>true</code>
      for requests received by this Connector. You would want this on an
      SSL Connector or a non SSL connector that is receiving data from a
      SSL accelerator, like a crypto card, an SSL appliance or even a webserver.
      The default value is <code>false</code>.</p>
    </attribute>

    <attribute name="URIEncoding" required="false">
      <p>This specifies the character encoding used to decode the URI bytes,
      after %xx decoding the URL. The default value is <code>UTF-8</code>.</p>
    </attribute>

    <attribute name="useBodyEncodingForURI" required="false">
      <p>This specifies if the encoding specified in contentType should be used
      for URI query parameters, instead of using the URIEncoding. This
      setting is present for compatibility with Tomcat 4.1.x, where the
      encoding specified in the contentType, or explicitly set using
      Request.setCharacterEncoding method was also used for the parameters from
      the URL. The default value is <code>false</code>.
      </p>
      <p><em>Notes:</em> See notes on this attribute in
      <a href="http.html">HTTP Connector</a> documentation.</p>
    </attribute>

    <attribute name="useIPVHosts" required="false">
      <p>Set this attribute to <code>true</code> to cause Tomcat to use
      the IP address passed by the native web server to determine the Host
      to send the request to.  The default value is <code>false</code>.</p>
    </attribute>

    <attribute name="xpoweredBy" required="false">
      <p>Set this attribute to <code>true</code> to cause Tomcat to advertise
      support for the Servlet specification using the header recommended in the
      specification.  The default value is <code>false</code>.</p>
    </attribute>

  </attributes>

  </subsection>

  <subsection name="Standard Implementations">

  <p>To use AJP, you must specify the protocol attribute (see above).</p>

  <p>The standard AJP connectors (NIO and NIO2) both support the following
  attributes in addition to the common Connector attributes listed above.</p>

  <attributes>

    <attribute name="acceptCount" required="false">
      <p>The maximum length of the operating system provided queue for incoming
      connection requests when <code>maxConnections</code> has been reached. The
      operating system may ignore this setting and use a different size for the
      queue. When this queue is full, the operating system may actively refuse
      additional connections or those connections may time out. The default
      value is 100.</p>
    </attribute>

    <attribute name="acceptorThreadPriority" required="false">
      <p>The priority of the acceptor threads. The threads used to accept
      new connections. The default value is <code>5</code> (the value of the
      <code>java.lang.Thread.NORM_PRIORITY</code> constant). See the JavaDoc
      for the <code>java.lang.Thread</code> class for more details on what
      this priority means.</p>
    </attribute>

    <attribute name="address" required="false">
      <p>For servers with more than one IP address, this attribute specifies
      which address will be used for listening on the specified port. By
      default, the connector will listen on the loopback address. Unless the JVM
      is configured otherwise using system properties, the Java based connectors
      (NIO, NIO2) will listen on both IPv4 and IPv6 addresses when configured
      with either <code>0.0.0.0</code> or <code>::</code>.</p>
    </attribute>

    <attribute name="ajpFlush" required="false">
      <p>A boolean value which can be used to enable or disable sending
      AJP flush messages to the fronting proxy whenever an explicit
      flush happens. The default value is <code>true</code>.<br/>
      An AJP flush message is a SEND_BODY_CHUNK packet with no body content.
      Proxy implementations like mod_jk or mod_proxy_ajp will flush the
      data buffered in the web server to the client when they receive
      such a packet. Setting this to <code>false</code> can reduce
      AJP packet traffic but might delay sending packets to the client.
      At the end of the response, AJP does always flush to the client.</p>
    </attribute>

    <attribute name="allowedRequestAttributesPattern" required="false">
      <p>The AJP protocol passes some information from the reverse proxy to the
      AJP connector using request attributes. These attributes are:</p>
      <ul>
        <li>javax.servlet.request.cipher_suite</li>
        <li>javax.servlet.request.key_size</li>
        <li>javax.servlet.request.ssl_session</li>
        <li>javax.servlet.request.X509Certificate</li>
        <li>AJP_LOCAL_ADDR</li>
        <li>AJP_REMOTE_PORT</li>
        <li>AJP_SSL_PROTOCOL</li>
        <li>JK_LB_ACTIVATION</li>
        <li>CERT_ISSUER (IIS only)</li>
        <li>CERT_SUBJECT (IIS only)</li>
        <li>CERT_COOKIE (IIS only)</li>
        <li>HTTPS_SERVER_SUBJECT (IIS only)</li>
        <li>CERT_FLAGS (IIS only)</li>
        <li>HTTPS_SECRETKEYSIZE (IIS only)</li>
        <li>CERT_SERIALNUMBER (IIS only)</li>
        <li>HTTPS_SERVER_ISSUER (IIS only)</li>
        <li>HTTPS_KEYSIZE (IIS only)</li>
      </ul>
      <p>The AJP protocol supports the passing of arbitrary request attributes.
      Requests containing arbitrary request attributes will be rejected with a
      403 response unless the entire attribute name matches this regular
      expression. If not specified, the default value is <code>null</code>.</p>
    </attribute>

    <attribute name="bindOnInit" required="false">
      <p>Controls when the socket used by the connector is bound. If set to
      <code>true</code> it is bound when the connector is initiated and unbound
      when the connector is destroyed. If set to <code>false</code>, the socket
      will be bound when the connector is started and unbound when it is
      stopped. If not specified, the default is <code>true</code>.</p>
    </attribute>

    <attribute name="clientCertProvider" required="false">
      <p>When client certificate information is presented in a form other than
      instances of <code>java.security.cert.X509Certificate</code> it needs to
      be converted before it can be used and this property controls which JSSE
      provider is used to perform the conversion. If not specified, the default
      provider will be used.</p>
    </attribute>

    <attribute name="connectionLinger" required="false">
      <p>The number of seconds during which the sockets used by this
      <strong>Connector</strong> will linger when they are closed. The default
      value is <code>-1</code> which disables socket linger.</p>
    </attribute>

    <attribute name="connectionTimeout" required="false">
      <p>The number of milliseconds this <strong>Connector</strong> will wait,
      after accepting a connection, for the request URI line to be
      presented.  The default value for AJP protocol connectors
      is <code>-1</code> (i.e. infinite).</p>
    </attribute>

    <attribute name="executor" required="false">
      <p>A reference to the name in an <a href="executor.html">Executor</a>
      element. If this attribute is set, and the named executor exists, the
      connector will use the executor, and all the other thread attributes will
      be ignored. Note that if a shared executor is not specified for a
      connector then the connector will use a private, internal executor to
      provide the thread pool.</p>
    </attribute>

    <attribute name="executorTerminationTimeoutMillis" required="false">
      <p>The time that the private internal executor will wait for request
      processing threads to terminate before continuing with the process of
      stopping the connector. If not set, the default is <code>5000</code> (5
      seconds).</p>
    </attribute>

    <attribute name="keepAliveTimeout" required="false">
      <p>The number of milliseconds this <strong>Connector</strong> will wait for
       another AJP request before closing the connection.
       The default value is to use the value that has been set for the
       connectionTimeout attribute.</p>
    </attribute>

    <attribute name="maxConnections" required="false">
      <p>The maximum number of connections that the server will accept and
      process at any given time. When this number has been reached, the server
      will accept, but not process, one further connection. This additional
      connection be blocked until the number of connections being processed
      falls below <strong>maxConnections</strong> at which point the server will
      start accepting and processing new connections again. Note that once the
      limit has been reached, the operating system may still accept connections
      based on the <code>acceptCount</code> setting. The default value
      is <code>8192</code>.</p>
      <p>For NIO/NIO2 only, setting the value to -1, will disable the
      maxConnections feature and connections will not be counted.</p>
    </attribute>

    <attribute name="maxHeaderCount" required="false">
      <p>The maximum number of headers in a request that are allowed by the
      container. A request that contains more headers than the specified limit
      will be rejected. A value of less than 0 means no limit.
      If not specified, a default of 100 is used.</p>
    </attribute>

    <attribute name="maxThreads" required="false">
      <p>The maximum number of request processing threads to be created
      by this <strong>Connector</strong>, which therefore determines the
      maximum number of simultaneous requests that can be handled.  If
      not specified, this attribute is set to 200. If an executor is associated
      with this connector, this attribute is ignored as the connector will
      execute tasks using the executor rather than an internal thread pool. Note
      that if an executor is configured any value set for this attribute will be
      recorded correctly but it will be reported (e.g. via JMX) as
      <code>-1</code> to make clear that it is not used.</p>
    </attribute>

    <attribute name="minSpareThreads" required="false">
      <p>The minimum number of threads always kept running. This includes both
      active and idle threads. If not specified, the default of <code>10</code>
      is used. If an executor is associated with this connector, this attribute
      is ignored as the connector will execute tasks using the executor rather
      than an internal thread pool. Note that if an executor is configured any
      value set for this attribute will be recorded correctly but it will be
      reported (e.g. via JMX) as <code>-1</code> to make clear that it is not
      used.</p>
    </attribute>

    <attribute name="packetSize" required="false">
      <p>This attribute sets the maximum AJP packet size in Bytes. The maximum
      value is 65536. It should be the same as the <code>max_packet_size</code>
      directive configured for mod_jk. Normally it is not necessary to change
      the maximum packet size. Problems with the default value have been
      reported when sending certificates or certificate chains. The default
      value is 8192. If set to less than 8192 then the setting will ignored and
      the default value of 8192 used.</p>
    </attribute>

    <attribute name="processorCache" required="false">
      <p>The protocol handler caches Processor objects to speed up performance.
      This setting dictates how many of these objects get cached.
      <code>-1</code> means unlimited, default is <code>200</code>. If not using
      Servlet 3.0 asynchronous processing, a good default is to use the same as
      the maxThreads setting. If using Servlet 3.0 asynchronous processing, a
      good default is to use the larger of maxThreads and the maximum number of
      expected concurrent requests (synchronous and asynchronous).</p>
    </attribute>

    <attribute name="secret" required="false">
      <p>Only requests from workers with this secret keyword will be accepted.
      The default value is <code>null</code>. This attribute must be specified
      with a non-null, non-zero length value unless
      <strong>secretRequired</strong> is explicitly configured to be
      <code>false</code>. If this attribute is configured with a non-null,
      non-zero length value then the workers <strong>must</strong> provide a
      matching value else the request will be rejected irrespective of the
      setting of <strong>secretRequired</strong>.</p>
    </attribute>

    <attribute name="secretRequired" required="false">
      <p>If this attribute is <code>true</code>, the AJP Connector will only
      start if the <strong>secret</strong> attribute is configured with a
      non-null, non-zero length value. This attribute only controls whether
      the <strong>secret</strong> attribute is required to be specified for the
      AJP Connector to start. It <strong>does not</strong> control whether
      workers are required to provide the secret. The default value is
      <code>true</code>. This attribute should only be set to <code>false</code>
      when the Connector is used on a trusted network.</p>
    </attribute>

    <attribute name="tcpNoDelay" required="false">
      <p>If set to <code>true</code>, the TCP_NO_DELAY option will be
      set on the server socket, which improves performance under most
      circumstances.  This is set to <code>true</code> by default.</p>
    </attribute>

    <attribute name="threadPriority" required="false">
      <p>The priority of the request processing threads within the JVM.
      The default value is <code>5</code> (the value of the
      <code>java.lang.Thread.NORM_PRIORITY</code> constant). See the JavaDoc
      for the <code>java.lang.Thread</code> class for more details on what
      this priority means.If an executor is associated
      with this connector, this attribute is ignored as the connector will
      execute tasks using the executor rather than an internal thread pool. Note
      that if an executor is configured any value set for this attribute will be
      recorded correctly but it will be reported (e.g. via JMX) as
      <code>-1</code> to make clear that it is not used.</p>
    </attribute>

    <attribute name="throwOnFailure" required="false">
      <p>If the Connector experiences an Exception during a Lifecycle transition
      should the Exception be rethrown or logged? If not specified, the default
      of <code>false</code> will be used. Note that the default can be changed
      by the <code>org.apache.catalina.startup.EXIT_ON_INIT_FAILURE</code>
      system property.</p>
    </attribute>

    <attribute name="tomcatAuthentication" required="false">
      <p>If set to <code>true</code>, the authentication will be done in Tomcat.
      Otherwise, the authenticated principal will be propagated from the native
      webserver and used for authorization in Tomcat. </p>
      <p>The web server must send the user principal (username) as a request
      <i>attribute</i> named <code>REMOTE_USER</code>.</p>
      <p>Note that this principal will have no roles associated with it.</p>
      <p>The default value is <code>true</code>. If
      <code>tomcatAuthorization</code> is set to <code>true</code> this
      attribute has no effect.</p>
    </attribute>

    <attribute name="tomcatAuthorization" required="false">
      <p>If set to <code>true</code>, the authenticated principal will be
      propagated from the native webserver and considered already authenticated
      in Tomcat. If the web application has one or more security constraints,
      authorization will then be performed by Tomcat and roles assigned to the
      authenticated principal. If the appropriate Tomcat Realm for the request
      does not recognise the provided user name, a Principal will be still be
      created but it will have no roles. The default value is
      <code>false</code>.</p>
    </attribute>

    <attribute name="useVirtualThreads" required="false">
      <p>(bool) Use this attribute to enable or disable usage of virtual threads
      with the internal executor. If an executor is associated with this
      connector, this attribute is ignored. The default value is
      <code>false</code>.</p>
    </attribute>

  </attributes>

  </subsection>

  <subsection name="Java TCP socket attributes">

    <p>The NIO and NIO2 implementation support the following Java TCP socket
    attributes in addition to the common Connector and HTTP attributes listed
    above.</p>

    <attributes>
      <attribute name="socket.rxBufSize" required="false">
        <p>(int)The socket receive buffer (SO_RCVBUF) size in bytes. JVM default
        used if not set.</p>
      </attribute>
      <attribute name="socket.txBufSize" required="false">
        <p>(int)The socket send buffer (SO_SNDBUF) size in bytes. JVM default
        used if not set. Care should be taken if explicitly setting this value.
        Very poor performance has been observed on some JVMs with values less
        than ~8k.</p>
      </attribute>
      <attribute name="socket.tcpNoDelay" required="false">
        <p>(bool)This is equivalent to standard attribute
        <strong>tcpNoDelay</strong>.</p>
      </attribute>
      <attribute name="socket.soKeepAlive" required="false">
        <p>(bool)Boolean value for the socket's keep alive setting
        (SO_KEEPALIVE). JVM default used if not set.</p>
      </attribute>
      <attribute name="socket.ooBInline" required="false">
        <p>(bool)Boolean value for the socket OOBINLINE setting. JVM default
        used if not set.</p>
      </attribute>
      <attribute name="socket.soReuseAddress" required="false">
        <p>(bool)Boolean value for the sockets reuse address option
        (SO_REUSEADDR). JVM default used if not set.</p>
      </attribute>
      <attribute name="socket.soLingerOn" required="false">
        <p>(bool)Boolean value for the sockets so linger option (SO_LINGER).
        A value for the standard attribute <strong>connectionLinger</strong>
        that is &gt;=0 is equivalent to setting this to <code>true</code>.
        A value for the standard attribute <strong>connectionLinger</strong>
        that is &lt;0 is equivalent to setting this to <code>false</code>.
        Both this attribute and <code>soLingerTime</code> must be set else the
        JVM defaults will be used for both.</p>
      </attribute>
      <attribute name="socket.soLingerTime" required="false">
        <p>(int)Value in seconds for the sockets so linger option (SO_LINGER).
        This is equivalent to standard attribute
        <strong>connectionLinger</strong>.
        Both this attribute and <code>soLingerOn</code> must be set else the
        JVM defaults will be used for both.</p>
      </attribute>
      <attribute name="socket.soTimeout" required="false">
        <p>This is equivalent to standard attribute
        <strong>connectionTimeout</strong>.</p>
      </attribute>
      <attribute name="socket.performanceConnectionTime" required="false">
        <p>(int)The first value for the performance settings. See
        <a href="https://docs.oracle.com/en/java/javase/17/docs/api/java.base/java/net/Socket.html#setPerformancePreferences(int,int,int)">Socket Performance Options</a>
        All three performance attributes must be set else the JVM defaults will
        be used for all three.</p>
      </attribute>
      <attribute name="socket.performanceLatency" required="false">
        <p>(int)The second value for the performance settings. See
        <a href="https://docs.oracle.com/en/java/javase/17/docs/api/java.base/java/net/Socket.html#setPerformancePreferences(int,int,int)">Socket Performance Options</a>
        All three performance attributes must be set else the JVM defaults will
        be used for all three.</p>
      </attribute>
      <attribute name="socket.performanceBandwidth" required="false">
        <p>(int)The third value for the performance settings. See
        <a href="https://docs.oracle.com/en/java/javase/17/docs/api/java.base/java/net/Socket.html#setPerformancePreferences(int,int,int)">Socket Performance Options</a>
        All three performance attributes must be set else the JVM defaults will
        be used for all three.</p>
      </attribute>
      <attribute name="socket.unlockTimeout" required="false">
        <p>(int) The timeout for a socket unlock. When a connector is stopped, it will try to release the acceptor thread by opening a connector to itself.
           The default value is <code>250</code> and the value is in milliseconds</p>
      </attribute>
    </attributes>
  </subsection>

  <subsection name="NIO specific configuration">

    <p>The following attributes are specific to the NIO connector.</p>

    <attributes>

      <attribute name="socket.directBuffer" required="false">
        <p>(bool)Boolean value, whether to use direct ByteBuffers or java mapped
        ByteBuffers. Default is <code>false</code>.<br/>
        When you are using direct buffers, make sure you allocate the
        appropriate amount of memory for the direct memory space. On Sun's JDK
        that would be something like <code>-XX:MaxDirectMemorySize=256m</code>.
        </p>
      </attribute>

      <attribute name="socket.appReadBufSize" required="false">
        <p>(int)Each connection that is opened up in Tomcat get associated with
        a read ByteBuffer. This attribute controls the size of this buffer. By
        default this read buffer is sized at <code>8192</code> bytes. For lower
        concurrency, you can increase this to buffer more data. For an extreme
        amount of keep alive connections, decrease this number or increase your
        heap size.</p>
      </attribute>

      <attribute name="socket.appWriteBufSize" required="false">
        <p>(int)Each connection that is opened up in Tomcat get associated with
        a write ByteBuffer. This attribute controls the size of this buffer. By
        default this write buffer is sized at <code>8192</code> bytes. For low
        concurrency you can increase this to buffer more response data. For an
        extreme amount of keep alive connections, decrease this number or
        increase your heap size.<br/>
        The default value here is pretty low, you should up it if you are not
        dealing with tens of thousands concurrent connections.</p>
      </attribute>

      <attribute name="socket.bufferPool" required="false">
        <p>(int)The NIO connector uses a class called NioChannel that holds
        elements linked to a socket. To reduce garbage collection, the NIO
        connector caches these channel objects. This value specifies the size of
        this cache. The default value is <code>500</code>, and represents that
        the cache will hold 500 NioChannel objects. Other values are
        <code>-1</code> for unlimited cache and <code>0</code> for no cache.</p>
      </attribute>

      <attribute name="socket.bufferPoolSize" required="false">
        <p>(int)The NioChannel pool can also be size based, not used object
        based. The size is calculated as follows:<br/>
        NioChannel
        <code>buffer size = read buffer size + write buffer size</code><br/>
        SecureNioChannel <code>buffer size = application read buffer size +
        application write buffer size + network read buffer size +
        network write buffer size</code><br/>
        The value is in bytes, the default value is <code>1024*1024*100</code>
        (100 MiB).</p>
      </attribute>

      <attribute name="socket.processorCache" required="false">
        <p>(int)Tomcat will cache SocketProcessor objects to reduce garbage
        collection. The integer value specifies how many objects to keep in the
        cache at most. The default is <code>0</code>. Other values are
        <code>-1</code> for unlimited cache and <code>0</code> for no cache.</p>
      </attribute>

      <attribute name="socket.eventCache" required="false">
        <p>(int)Tomcat will cache PollerEvent objects to reduce garbage
        collection. The integer value specifies how many objects to keep in the
        cache at most. The default is <code>0</code>. Other values are
        <code>-1</code> for unlimited cache and <code>0</code> for no cache.</p>
      </attribute>

    </attributes>
  </subsection>

  <subsection name="NIO2 specific configuration">

    <p>The following attributes are specific to the NIO2 connector.</p>

    <attributes>

      <attribute name="useCaches" required="false">
        <p>(bool)Use this attribute to enable or disable object caching to
        reduce the amount of GC objects produced.
        The default value is <code>false</code>.</p>
      </attribute>

      <attribute name="socket.directBuffer" required="false">
        <p>(bool)Boolean value, whether to use direct ByteBuffers or java mapped
        ByteBuffers. Default is <code>false</code>.<br/>
        When you are using direct buffers, make sure you allocate the
        appropriate amount of memory for the direct memory space. On Sun's JDK
        that would be something like <code>-XX:MaxDirectMemorySize=256m</code>.
        </p>
      </attribute>

      <attribute name="socket.appReadBufSize" required="false">
        <p>(int)Each connection that is opened up in Tomcat get associated with
        a read ByteBuffer. This attribute controls the size of this buffer. By
        default this read buffer is sized at <code>8192</code> bytes. For lower
        concurrency, you can increase this to buffer more data. For an extreme
        amount of keep alive connections, decrease this number or increase your
        heap size.</p>
      </attribute>

      <attribute name="socket.appWriteBufSize" required="false">
        <p>(int)Each connection that is opened up in Tomcat get associated with
        a write ByteBuffer. This attribute controls the size of this buffer. By
        default this write buffer is sized at <code>8192</code> bytes. For low
        concurrency you can increase this to buffer more response data. For an
        extreme amount of keep alive connections, decrease this number or
        increase your heap size.<br/>
        The default value here is pretty low, you should up it if you are not
        dealing with tens of thousands concurrent connections.</p>
      </attribute>

      <attribute name="socket.bufferPoolSize" required="false">
        <p>(int)The NIO2 connector uses a class called Nio2Channel that holds
        elements linked to a socket. To reduce garbage collection, the NIO
        connector caches these channel objects. This value specifies the size of
        this cache. The default value is <code>500</code>, and represents that
        the cache will hold 500 Nio2Channel objects. Other values are
        <code>-1</code> for unlimited cache and <code>0</code> for no cache.</p>
      </attribute>

      <attribute name="socket.processorCache" required="false">
        <p>(int)Tomcat will cache SocketProcessor objects to reduce garbage
        collection. The integer value specifies how many objects to keep in the
        cache at most. The default is <code>0</code>. Other values are
        <code>-1</code> for unlimited cache and <code>0</code> for no cache.</p>
      </attribute>

    </attributes>
  </subsection>

</section>


<section name="Nested Components">

  <p>None at this time.</p>

</section>

<section name="Special Features">

  <subsection name="Proxy Support">

  <p>The <code>proxyName</code> and <code>proxyPort</code> attributes can
  be used when Tomcat is run behind a proxy server.  These attributes
  modify the values returned to web applications that call the
  <code>request.getServerName()</code> and <code>request.getServerPort()</code>
  methods, which are often used to construct absolute URLs for redirects.
  Without configuring these attributes, the values returned would reflect
  the server name and port on which the connection from the proxy server
  was received, rather than the server name and port to whom the client
  directed the original request.</p>

  <p>For more information, see the
  <a href="../proxy-howto.html">Proxy Support How-To</a>.</p>

  </subsection>

  <subsection name="Connector Comparison">

    <p>Below is a small chart that shows how the connectors differ.</p>

    <table class="defaultTable" style="text-align: center;">
      <tr>
        <th />
        <th style="text-align: center;">Java Nio Connector<br />NIO</th>
        <th style="text-align: center;">Java Nio2 Connector<br />NIO2</th>
      </tr>
      <tr>
        <th>Classname</th>
        <td><code class="noHighlight">AjpNioProtocol</code></td>
        <td><code class="noHighlight">AjpNio2Protocol</code></td>
      </tr>
      <tr>
        <th>Tomcat Version</th>
        <td>7.x onwards</td>
        <td>8.x onwards</td>
      </tr>
      <tr>
        <th>Support Polling</th>
        <td>YES</td>
        <td>YES</td>
      </tr>
      <tr>
        <th>Polling Size</th>
        <td><code class="noHighlight">maxConnections</code></td>
        <td><code class="noHighlight">maxConnections</code></td>
      </tr>
      <tr>
        <th>Read Request Headers</th>
        <td>Blocking</td>
        <td>Blocking</td>
      </tr>
      <tr>
        <th>Read Request Body</th>
        <td>Blocking</td>
        <td>Blocking</td>
      </tr>
      <tr>
        <th>Write Response Headers and Body</th>
        <td>Blocking</td>
        <td>Blocking</td>
      </tr>
      <tr>
        <th>Wait for next Request</th>
        <td>Non Blocking</td>
        <td>Non Blocking</td>
      </tr>
      <tr>
        <th>Max Connections</th>
        <td><code class="noHighlight">maxConnections</code></td>
        <td><code class="noHighlight">maxConnections</code></td>
      </tr>
    </table>

  </subsection>

</section>

</body>

</document>
